Dated frames in Camborne: measurement and tolerance
Measuring, tolerance and fit in Camborne. We measure properly before anything is ordered, and the measurements go on the quote.
We measure properly before anything is ordered, and the measurements go on the quote.
Openings are rarely square. Diagonals differ, reveals taper, and lintels sag by small amounts over decades, so anything made to a single width and height will fight the hole it is put into.
Measuring, tolerance and fit in Camborne
Openings are rarely square. Diagonals differ, reveals taper, and lintels sag by small amounts over decades, so anything made to a single width and height will fight the hole it is put into.
Proper measurement takes width and height at three points each, both diagonals, and a level and plumb reading, then works to the smallest dimension with a deliberate tolerance for packing and sealing. That deliberate gap is not sloppiness — it is what allows the unit to be shimmed square inside an out-of-square hole.
Sight sizes matter as much as overall sizes. Two openings that measure identically outside can need different glass if the rebate depths differ, which is why templates are taken rather than assumed.
Dated frames Camborne: measurement and tolerance
Because manufacture works to millimetres. A check measure after the survey is cheaper for everyone than a component made to a number that turned out to be a rough one.
Dated frames Camborne: measurement and tolerance
Sight sizes matter as much as overall sizes. Two openings that measure identically outside can need different glass if the rebate depths differ, which is why templates are taken rather than assumed.
measurement and tolerance decision path for Dated frames in Camborne
Proper measurement takes width and height at three points each, both diagonals, and a level and plumb reading, then works to the smallest dimension with a deliberate tolerance for packing and sealing. That deliberate gap is not sloppiness — it is what allows the unit to be shimmed square inside an out-of-square hole.
Dated frames Camborne: measurement and tolerance
- Dated frames in Camborne: Why is a second measuring visit sometimes needed? — what matters for mining-era terraces?
- Because manufacture works to millimetres. A check measure after the survey is cheaper for everyone than a component made to a number that turned out to be a rough one.
Related services for Camborne
Or go straight to the town pages: window replacements in Camborne and window spraying in Camborne.
Ready to start your project?
Free quotes · 10-year guarantee · Friendly local service.